Environmental testing
Compost, biosolids and wastewater are sampled to protect water quality and to put nutrients to work on the land. The analyses are similar to agricultural ones, but the sampling rules are stricter and the results often feed a written plan.
Common analyses
| Material | Often measured | Why |
|---|---|---|
| Compost | Moisture, organic matter, pH, soluble salts, carbon to nitrogen ratio, nutrients | Judging maturity and suitability for beds, turf and potting mixes |
| Biosolids and sludge | Nitrogen forms, phosphorus, metals, solids | Setting land application rates within a nutrient plan |
| Wastewater | Solids, nutrients, oxygen demand, pH | Treatment monitoring and discharge or irrigation reuse planning |
Accreditation, in general terms
Some programs require results from a laboratory accredited under a recognised standard, for example the national environmental laboratory accreditation program in the United States. Which program applies depends on the state and the permit, so confirm the requirement with the agency that issued yours before you pick a laboratory.
Sampling reminders
- Use the container and preservative the method calls for. Wastewater and water samples are often collected in bottles supplied for the purpose.
- Keep liquid samples cool and get them to the laboratory quickly; holding times are short for some analyses.
- Record the date, time and sampling point on the container and on the chain-of-custody paperwork if the plan requires it.
- Take compost and biosolids from several points in the pile or load and combine them, because material varies from edge to center.
Rules for land application and discharge differ by state and change over time. Read the permit conditions and ask the regulating agency if a requirement is unclear.